Effects of acid rain on physical,mechanical and chemical properties of GGBS–MgO-solidified/stabilized Pb-contaminated clayey soil     

Du  Yan-Jun  Wu  Jian  Bo  Yu-Lin  Jiang  Ning-Jun 《Acta Geotechnica》2020,15(4):923-932

Acta Geotechnica - Reactive magnesia (MgO)-activated ground granulated blast furnace slag (GGBS) is a newly developed binder for soil stabilization/solidification. It can be used as an alternative...  相似文献   

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type     

Li‐Juan Du  Bo Li  Zhi‐Long Huang  Jun Chen  Jia‐Xi Zhou  Guo‐Fu Zou  Zai‐Fei Yan 《Resource Geology》2020,70(1):28-49

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.  相似文献   

Using Mesoproterozoic sedimentary geochemistry to reconstruct basin tectonic geography and link organic carbon productivity to nutrient flux from a Northern Australian large igneous Province     

Bo Yang  Alan S. Collins  Grant M. Cox  Amber J. M. Jarrett  Steven Denyszyn  Morgan L. Blades  Juraj Farkaš  Stijn Glorie 《Basin Research》2020,32(6):1734-1750

The Beetaloo Sub-basin, northern Australia, is considered the main depocentre of the 1,000-km scale Mesoproterozoic Wilton package of the greater McArthur Basin – the host to one of the oldest hydrocarbon global resources. The ca. 1.40–1.31 Ga upper Roper Group and the latest Mesoproterozoic to early Neoproterozoic unnamed group of the Beetaloo Sub-basin, together, record ca. 500 million years of depositional history within the North Australia Craton. Whole-rock shale Sm–Nd and Pb isotope data from these sediments reveal sedimentary provenance and their evolution from ca. 1.35 to 0.85 Ga. Furthermore, these data, together with shale major/trace elements data from this study and pyrolysis data from previous publications, are used to develop a dynamic tectonic geography model that links the organic carbon production and burial to an enhanced weathering of nutrients from a large igneous province. The ca. 1.35–1.31 Ga Kyalla Formation of the upper Roper Group is composed of isotopically evolved sedimentary detritus that passes up, into more isotopically juvenile Pb values towards the top of the formation. The increase in juvenile compositions coincides with elevated total organic carbon (TOC) contents of these sediments. The coherently enriched juvenile compositions and TOC the upper portions of the Kyalla Formation are interpreted to reflect an increase in nutrient supply associated with the weathering of basaltic sources (e.g. phosphorous). Possible, relatively juvenile, basaltic sources include the Wankanki Supersuite in the western Musgraves and the Derim Derim–Galiwinku large igneous province (LIP). The transition into juvenile, basaltic sources directly before a supersequence-bounding unconformity is here interpreted to reflect uplift and erosion of the Derim Derim–Galiwinku LIP, rather than an influx of southern Musgrave sources. A new baddeleyite crystallisation age of 1,312.9 ± 0.7 Ma provides both a tight constraint on the age of this LIP, along with its associated magmatic uplift, as well as providing a minimum age constraint for Roper Group deposition. The unconformably overlying lower and upper Jamison sandstones are at least 300 million years younger than the Kyalla Formation and were sourced from the Musgrave Province. An up-section increase in isotopically juvenile compositions seen in these rocks is interpreted to document the progressive exhumation of the western Musgrave Province. The overlying Hayfield mudstone received detritus from both the Musgrave and Arunta regions, and its isotopic geochemistry reveals affinities with other early Neoproterozoic basins (e.g. Amadeus, Victoria and Officer basins), indicating the potential for inter-basin correlations.  相似文献   

广西合浦盆地干热岩资源成热条件及潜力评价     

康志强  张起钻  管彦武  冯波  袁金福  孙明行  刘德民  王新宇  杨志强  陆济璞  张勤军  冯民豪 《吉林大学学报(地球科学版)》2020,50(4):1151-1160

为了对广西合浦盆地干热岩资源成热条件及其潜力进行评价，利用广西航磁勘查数据，采用Parker-Oldenburg法反演计算了居里面深度。在此基础上进行大地热流密度值和不同埋深地温计算，发现计算结果与现有测温资料吻合，合浦盆地内西场凹陷和常乐凹陷具有干热岩资源成生条件。结合合浦盆地内基础地质调查资料和油气钻孔资料，分析了合浦盆地干热岩资源的储层和盖层条件。初步圈出2个位于西场凹陷和常乐凹陷的干热岩勘查靶区C1和C2，面积分别为167.10和72.90 km²，干热岩资源量分别为182.48×10¹⁵、77.59×10¹⁵ J。按20%的采收率，合浦盆地干热岩资源量可开采量为52.01×10¹⁵ J，折合标准煤177.48×10⁴ t，占2018年广西全区能源生产总量3 756.69×10⁴ t标准煤的4.72%。在资源量评价基础上，可优先考虑位于合浦盆地西场凹陷的C1靶区开展进一步的勘探工作。  相似文献   

2017年九寨沟M_S7.0地震对周围地区的静态应力影响          下载免费PDF全文

靳志同  万永革  刘兆才  黄骥超  李瑶  杨帆 《地球物理学报》2019,62(4):1282-1299

基于九寨沟M_S7.0地震的破裂模型及均匀弹性半空间模型，本文计算了该地震在周围主要活动断层上产生的库仑应力变化、在周围地区产生的应力场和位移场和同震库仑应力变化对余震的触发.结果表明：（1）九寨沟地震造成虎牙断裂中段库仑破裂应力有较大增加，已经超过0.01 MPa的阈值，虎牙断裂北段、塔藏断裂中段和岷江断裂北段北部的库仑破裂应力有较大降低，因此尤其要注意虎牙断裂中段的危险性.（2）水平面应力场在该地震震中东西两侧增加（拉张），张应力起主要作用.在震中南北两侧降低（压缩），压应力起主要作用.从水平主压和主张应力方向来看，均呈现出条形磁铁的磁场形态.从剖面上的应力场来看，在上盘的面膨胀区域内，大部分点的主张应力方向与地表是垂直的，在其他区域内，主张应力和主压应力均以震中为中心，向外呈辐射状.（3）从地表水平位移场来看，震中东西两侧物质朝震中位置汇聚，南北两侧物质向外流出，在震中处的最大水平位移量达43 mm.从地表垂直位移场来看，震中南北两侧出现明显的隆升，隆升最大值达56.8 mm.震中东西两侧出现明显的沉降，沉降最大值达74.5 mm.从剖面的位移场来看，九寨沟地震为左旋走滑地震，且有一定的正断成分.由分析可以推测该断层破裂在大致22~26 km的深度上就截止了.并推测下盘物质运动的动力来自震源北东东方向（四川块体）深度在6~30 km的下盘下层物质，上盘物质运动的动力来自震源北西西方向（巴颜喀拉块体）深度在0~6 km的上盘上层物质.（4）通过计算不同深度上主震对余震的触发作用可知，主震后的最大余震受到了主震的触发作用，多数其他余震也受到主震的触发作用.主震的发生促使了库仑应力增加地区余震的发生，抑制了一部分库仑应力减少地区余震的发生.  相似文献   

Innovative Techniques for Measuring the Oil Content of Oil-Contaminated Porous Media     

Tianyuan Zheng  Xilai Zheng  Huan Wang  Jia Xin  Bo Zhang  Marc Walther 《Ground Water Monitoring & Remediation》2019,39(3):78-83

The oil content of oil-contaminated porous media is an important parameter for the assessment and remediation of oil pollution in soil and groundwater. However, an accurate measurement method is not available. In this study, we propose a new equation to calculate the oil content of water-bearing media based on traditional extraction–ultraviolet spectroscopy. Further, an improved experimental method was developed. The results indicate that the pure solid weight and oil content of oil-contaminated media can be accurately determined by introducing the oil drying loss coefficient (γ). The average relative errors of the improved method range from −0.14% to −0.96%. They are much smaller than errors of −4.49% to −10.97% of the original methods, indicating that the accuracy of measured oil content is enhanced. In addition, the accuracy of the new method does not depend on oil volatility and oil content.  相似文献   

山东长岛海域震群重定位及震源特征研究     

李铂  崔鑫  张志慧  蔡寅  季爱东 《震灾防御技术》2019,14(1):108-117

基于山东数字化地震台站的震相资料和胶东半岛地区的速度结构模型，利用双差定位方法对2017年2月14日开始的山东长岛地区双震群进行重新定位，结果显示主震群余震序列分布沿一级断裂分布，震群位置比较集中。并利用CAP方法（Cut and Paste）对长岛海域2个震群中的几个较大地震进行震源机制解的反演分析，其中，2017年3月3日的主震震源机制解的节面Ⅰ走向为320°，倾角57°，滑动角为12°；节面Ⅱ走向为223.4°，倾角80°，滑动角为146.4°；主震的最佳拟合深度在9.7km，6次较大地震的节面Ⅰ走向也基本一致。  相似文献   

中国城市抗御地震灾害研究的发展与实践   总被引：1，自引：1，他引：0  

薄景山  李平  孙有为  蔡晓光  焦淙湃  张莹允 《震灾防御技术》2019,14(2):259-268

城市是社会发展的产物，它具有人口密集、经济发达、基础设施集中等特点。城市安全一直是人们普遍关心的问题，城市地震安全受到政府和社会的广泛关注，并且是学术界研究的热点问题之一。唐山大地震后，在反思惨痛震害教训的同时，中国政府和学术界开始了长达40余年的城市抗御地震灾害的研究与实践，形成了有中国特色的城市抗震防灾技术和方法。本文简要地归纳了破坏性地震对城市的影响，从我国先后开展的城市抗震防灾规划、防震减灾规划和韧性城市3个方面系统地总结了中国城市抗御地震灾害研究和实践的发展历程，讨论和评述了在这一研究领域存在的问题。本文对韧性城市的定义、研究内容、特征、评价指标和方法进行了较为详细的介绍，在此基础上，提出了在城市抗震中应重点加强研究的5个方面的问题和今后的研究方向。  相似文献   

辽宁沿海地区海洋经济增长质量空间特征及影响要素     

李博  田闯  史钊源  韩增林 《地理科学进展》2019,38(7):1080-1092

在海洋经济质量转型之期,基于“认知—评价—建构—优化”理念,界定海洋经济增长质量内涵,通过中心-引力模型评价分析2000—2014年辽宁沿海地区海洋经济增长质量空间特征,构建了海洋经济增长质量模型,识别影响其空间特征的相关要素,并根据要素作用程度提出优化建议。研究发现：① 辽宁沿海地区海洋经济增长质量呈“核心—圈层”结构,形成以大连为“领头雁”的雁阵式相互继起模式;“钻石型”引力流结构促成辽宁沿海地区集中化连片发展格局;② 海洋经济增长质量空间特征主要受空间集聚效应影响,海洋资本、海洋基建和海洋产业结构成为推动海洋经济增长质量循环引力流的顺流机制,其中海洋产业结构成为影响辽宁海洋经济增长质量圈层空间集聚效应的关键流;海洋人才成为制约海洋经济增长质量循环引力流的逆流机制;③ 通过路径作用程度的象限划分,提出强化大连中心地职能,针对腹地城市定位及资源禀赋条件提出调控措施,推进沿海区域协调与一体化进程。  相似文献   

应用经验正交函数估算顶部电离层电子密度剖面          下载免费PDF全文

王林  万卫星  乐新安  任志鹏  佘承莉 《地球物理学报》2019,62(5):1582-1590

本文基于IRI模型、地面数字测高仪和GNSS TEC数据,提出了一种利用经验正交函数(Empirical Orthogonal Function,简称EOF)估算顶部电离层电子密度剖面的方法,并将其应用于美国Millstone Hill测高仪和GNSS数据以估算顶部电离层电子密度剖面.通过将估算的临界频率、峰值高度、400km以上电子密度分别与测高仪实测临界频率、测高仪实测峰值高度以及非相干散射雷达实测400km以上电子密度作对比以对方法的有效性进行验证.统计结果显示估算临界频率、峰值高度与测高仪实测数据基本一致,400km以上估算电子密度相较于非相干散射雷达实测的绝对误差平均值仅是测高仪推算400km以上电子密度绝对误差平均值的一半左右.所以本文提出的方法可以更加精确地估算顶部电离层电子密度.  相似文献